In most modern vehicles, such as GMCs and Chevys, StabiliTrak is a standard feature that aids in vehicle control on various terrains. The service stabilitrak light can, however, be triggered by software issues or by driving at high speeds, which can be shut off by resetting the vehicle.
Is there a way to reset the service StabiliTrak light? After you have turned off the car, turn the steering wheel clockwise and counterclockwise a few times, and then wait around 15 seconds to turn it back on. It depends on the make and model of the car how the process is carried out. In the case of a serious issue like a malfunctioning ABS system, wheel speed sensor, or alternator, it won’t help.
What Does Service StabiliTrak Light Mean?
In contrast to the StabiliTrak dash light, the service StabiliTrak light appears in the service area. When you see this warning light, the traction system is turned off and can be activated as needed. If that is the case, the service stabiltrak light is not a cause for concern and you can continue driving. In addition to indicating potential damage to the car’s components, the service stability light indicates what needs to be done.
A variety of factors can contribute to this issue, including steering problems and sensor malfunctions. It is important to address the underlying cause in this case, as mechanical problems or malfunctions in the StabiliTrak system can lead to the stability of the vehicle deteriorating.
As a result, driving can be dangerous and make the vehicle difficult to control. Make sure your car is taken to a reputable auto repair shop where an OBD2 scanner can be used to diagnose the problem.
What is the best spellto reset the Service StabiliTrak Light?
You can quickly and easily remove the service stabilitrak light by resetting it. StabiliTrak light can sometimes be an ineffective solution, and in such cases, it should not be reset.
The StabiliTrak light should not be reset using the on/off button if you see other lights on DIC (Driver Information Center) along with it. The StabiliTrak light should only be reset when an issue with software or a computer has caused it to illuminate.
Resetting your car will only temporarily mask stabilitrak massage if your car displays it due to electrical or mechanical issues. Driving will still pose a risk, because the actual problem will still exist.
Taking precautions before resetting the Service StabilTrak light
It is imperative to take these precautions before you attempt to reset the Service StabiliTrak Light:
How to Reset Service StabiliTrak Light?
In order to reset the stability light, you can either use a tool or without one, depending on the make and model of your car. Service stabilitrak can be reset using a few standard methods listed below.
Step 1
You should turn the steering wheel of your car clockwise, starting at 9 o’clock and ending at 3 o’clock. Unless the message disappears, your vehicle does not need to be serviced. Wait around 15 seconds after turning off your vehicle if the message does not disappear.
Once the car is turned on, the system will be reset. A service center should be contacted if the message still shows on the Driver Information Center (DIC).
Step 2
Take the key out of the ignition and shut it off. You should wait around 5 minutes after detaching the negative terminal from the battery. Once you have connected the terminal, start the engine. If you do this, the warning light on your car should disappear and the StabiliTrak system should be refreshed.
Step 3
Use your OBD scanner to determine and reset the error codes that trigger the service stability light if you have one.
If your vehicle has a diagnostic port under the dashboard, turn off the ignition and find it. The OBD scanner must be connected to the car and its key must be turned on.
Using the scanner, you can diagnose the error codes for your car by identifying its make and model. The error codes should be reset once you have completed the process. There may, however, be some internal problems in the car that need to be resolved in order to clear all error codes. The engine must be turned on around 30 seconds after the tool has been reset.
After Resetting Service StabiliTrak Light
It is essential to follow these steps after resetting the Service StabiliTrak Light:
Why does the StabiliTrak light come on?
There are several systems that contribute to StabiliTrak, including traction control, brakes, and steering position sensorsA car’s StabiliTrak is controlled by several systems, including traction control, brakes, and steering position sensors. In the event that any component of that system malfunctions, StabiliTrak will be disconnected.
Stability Control Module Problem
The system ensures that a vehicle is stable while driving by monitoring its performance. Besides controlling the operation of the stabilitrak, the control module can also activate the indicator light if there is an internal malfunction or a software issue.
Alternator Failure
StabiliTrak receives power from an alternator, which provides power to the vehicle’s electrical system. In the event that the alternator malfunctions or becomes damaged, the StabiliTrak will not be able to function properly, which will cause the warning light to illuminate. Additionally, it can cause other electrical problems.
Damaged Controller
Vehicle sensors send data to a controller, which allows the car to be controlled by the sensors. It is possible to lose control of the vehicle if the controller gets damaged, which will trigger the service stabilizer light.
Loss of ABS Function
There is a single module controlling both the ABS and Stabilitrak. Therefore, an ABS malfunction can affect StabiliTrak. The StabiliTrak will fail if the brake system fails in the worst case scenario. The ABS warning light as well as the StabiliTrak service light can be activated by your car due to this.
Damaged Wheel Speed Sensor
For StabiliTrak to work and receive signals, it depends on a variety of sensors, including wheel speed sensors. In this case, the StabiliTrak will activate when an incorrect wheel speed sensor sends incorrect data.
Symptoms of a malfunctioning Service StabiliTrak light
StabiliTrak might be malfunctioning if you experience the following symptoms:
Faulty Steering
When the car’s wheel moves without you pressing the accelerator, this is a clear indication that the car’s steering is erratic. It could be a problem with the control unit if your car’s wheel moves irregularly during steering.
Inconsistent Acceleration
If the car does not accelerate as quickly as you would like after pressing the accelerator, check the StabiliTrak system. When your vehicle senses a problem, it may activate the limp home mode. It is possible that the StabiliTrak will break down if the engine is turned on but the wheel isn’t moving.
Unusual Sounds
It is possible for your vehicle to make strange noises, such as grinding or rubbing, if the StabiliTrak system is malfunctioning. In addition, the StabiliTrak may malfunction and cause your car to whirr. In this case, you should have a mechanic inspect your car.
How to maintain a StabiliTrak system
Consider the following maintenance tips to maintain your StabiliTrak system optimally:
Is it safe to drive with the Service StabiliTrak light on?
The service stabilitrak light can be driven as long as you can adjust it or do not experience any problems while driving. It is common for drivers to turn off the StabiliTrak system during long trips to conserve vehicle power. However, if your service stabilrak light comes on without you deactivating the system, you shouldn’t drive.
In the case of a faulty StabiliTrak system, you may lose control of your vehicle since it maintains the stability and traction of your vehicle on the road. Furthermore, Stabilitrak assists in maintaining straightness of the car when it is moving in a zigzag pattern. When the steering wheel turns in the opposite direction as you apply the brakes, it automatically engages the brakes.
By doing so, StabiliTrak prevents accidents from occurring. In an emergency, you won’t be able to call for help if your service StabiliTrak light is activated. To make driving safer, diagnose the car and fix the problem even though you can drive with the warning light on.
What is the cost of fixing Service StabiliTrak?
In order to fix a Stabilitrak issue, the method that you use and the underlying cause will determine the repair cost. If you can simply set the system to turn off the warning light, the cost will not be incurred. You may have to spend anywhere from $30 to $500 on an OBD scanner if you wish to reset StabiliTrak.
It could be a bit more expensive to fix the servicing stabilitrak issue if the resetting process does not work. If your ABS control module is damaged, a mechanic can charge you between $320 and $1,000, while if your wheel speed sensor is damaged, you can expect to pay between $213 and $263.
It is relatively cheaper to repair faulty stability control modules or faulty controllers, as these costs range from $111 to $125 and $106 to $129 respectively. The cost of replacing the alternator in a car varies from $350 to 900 depending on the make and model.
Car Shuts Off While Driving: What To Do? (Causes)
How Far Can You Drive On 0 Miles To Empty?
Check Engine Light Went Off After A Week By Itself Automatically
FAQs
Will resetting the Service StabiliTrak Light fix the underlying issue?
Although the warning light may be temporarily cleared, the underlying issue will not be fixed by resetting it. The root cause of the problem must be diagnosed and addressed.
Is resetting the Service StabiliTrak Light a DIY task?
Using a diagnostic tool may require professional assistance in some cases, but manual testing can sometimes be done.
Can StabiliTrak cause the check engine light to come on?
A StabiliTrak system has individual error codes for all sensors and EBCMs. A malfunction of that system can cause the check engine light to illuminate. The check engine light and StabiliTrak warning light can be deactivated using an OBD reader in this situation.
Will service StabiliTrak light cause reduced engine power?
There is a direct connection between the StabiliTrak warning light and the traction control system of the car. The car’s computer automatically reduces power when it detects a problem with the StabiliTrak system. By doing so, the vehicle aims to prevent further damage and protect its occupants.
Why won’t my StabiliTrak light turn off?
In some cases, the fuse of the traction control system may not blow out, causing the StabiliTrak light not to turn off. It is also possible for the StabiliTrak light to stay on because of a problem with the traction control sensors. As a result, a deep diagnosis is required.
How often should I reset the Service StabiliTrak Light?
You don’t need to reset the light unless it illuminates because of a system issue.
Conclusion
You can save some energy on snowy or moody roads by knowing how to reset the service StabiliTrak light. Additionally, it can save you money if a software error results in the warning light coming on.
However, if the error message is caused by a car’s internal problem, resetting the system is not a good idea. You should therefore pay close attention to your car whenever you notice an active service stabilitrak light. Bring your vehicle to a service center as soon as you notice it is difficult to control.
