Ford F-150 Transmission Identification Codes Explained

Depending on model generation/year, trim level, and engine type, the Ford F150 offers multiple transmission identification codes. The transmission identification codes on your Ford F-150 are crucial if you recently purchased one.

For 1997-2003 Ford F-150 models, the transmission identification codes range from 4R100 to 4R70W and M5R2-C. For 2005 Ford F-150 models, the transmission identification codes range from 4R70E to 4R75E and M5R2-C.

Ford F-150 Transmission Identification Codes Explained

The guide below will guide you through what’s the transmission identification code for your Ford if this is your first time discovering it.

This write-up will provide an overview of transmission codes, where they are located, and some methods for identifying them. It will also be explained why it may be necessary to search for such codes.

Table of Contents

Importance of Knowing Transmission Identification Codes

You now know about some of the most common Ford F150 codes, but you may wonder how they can benefit you.

Importance of Knowing Transmission Identification Codes

It is essential to understand the type and design of your transmission for a number of reasons. The following examples illustrate the usefulness of this knowledge in some basic scenarios.

Impact on vehicle performance

For regular maintenance, it is important to have a thorough understanding of the type, code, and design of the transmission. Mechanics and workshops can use this information to locate specific parts, compatible fluids, and repair them effectively.


You will be able to successfully troubleshoot problems much more quickly if you have your vehicle identification number handy. In addition, finding compatible replacement models will be easier if you know its identification code.

Resale of cars

Prospective buyers may inquire about the transmission type and code if you intend to resell your Ford F150. To avoid any inconvenience later, you should therefore obtain this knowledge before selling.

Term & conditions

There are many terms and conditions associated with new models of trucks and maintenance plans. Consequently, knowing the code is important for determining whether a product is covered under warranty, maintenance, or insurance.

Breakdown of Transmission Identification Codes

Deciphering the code

When broken down into comprehensible parts, cracking the code becomes much easier. The code’s characters provide a detailed snapshot of the transmission’s configuration according to each character.

Components covered in the code

The identification code contains critical information about its transmission type and production date. Repairs, upgrades, or modifications to Ford F-150s can be effectively addressed when owners understand these components.

Understanding variations

It is important to remember that not all Ford F-150s are the same, and neither are their transmission identification codes. Other factors, such as model year and engine type, contribute to variation. Interpreting and applying these nuances correctly requires an understanding of their nuances.

What are the Ford F 150 Transmission Identification Codes?

There seems to be a lot of new terminology thrown around when it comes to vehicles, especially premium ones such as Ford. There are also terms like transmission identification code that are unfamiliar to some users.

What are the Ford F 150 Transmission Identification Codes

Identifying the F150 transmission type and specifications can be done quickly by utilizing these transmission identification codes. Model number, production year and other information are typically provided by these alphanumeric codes.

The following is a list of Ford F-150 identification codes.


This code refers to the 3-speed automatic transmission used on early F150 models from the 1950s and 1960s. The Ford F150 C3 coded models are the lightest-duty vehicles in the lineup.


In late 1990, 4R100 was introduced for heavy-duty applications as a 4-speed automatic transmission.


Specific heavy-duty F150 variants are equipped with the 5R110W automatic transmission.


This code is typically associated with models from the 1960s through the 1980s that feature a three-speed automatic transmission known as C6. A racing application was often performed using this transmission code.


As a result of improvements in fuel economy, 4-speed automatic transmissions were first introduced in the 1980s. Later, AODE, a computerized version, gained popularity.


Ford F150s from the late 1980s and early 1990s commonly had electronic four-speed overdrive automatic transmissions.


A 4-speed automatic transmission was introduced for later model years as an upgrade from AOD transmissions.

Ensuring Accurate Code Interpretation

Utilizing reliable resources

Our fingertips are teeming with information in the digital age. The transmission identification code of your Ford F-150 can be accurately interpreted with the assistance of reliable online resources and databases.

Seeking professional assistance

It is prudent to seek professional assistance if you are unfamiliar with automotive codes. Transmission identification codes can be decoded and interpreted accurately by qualified mechanics and technicians.

Online tools and databases

Ford F-150 enthusiasts have access to a variety of online tools that enable them to decode transmission identification codes with the aid of user-friendly interfaces. By using these tools, a broader audience can gain access to the knowledge.

Evolution of Transmission Codes in Ford F-150

Historical perspective

Advances in automotive technology have led to the evolution of transmission codes. Ford F-150 models are more sophisticated than they were in the past when examined within their historical context.

Technological advancements

Ford F-150 transmission systems continue to evolve as technology advances. As transmission codes evolve, new technologies are integrated, improving efficiency and performance.

Impact on modern models

A testament to Ford’s commitment to innovation can be seen in its transmission codes on modern F-150s. In addition to allowing owners to understand the vehicle’s current state, these codes will also prepare them for its future development.

Identifying Ford F-150 Transmission Identification Codes

On a Ford F150 truck, transmission identification codes can be found from two different sources. On your truck’s door jamb is a sticker displaying an alphabetic list displaying each type. Documents or transmissions can also be identified by tags attached to them.

Identifying Ford F-150 Transmission Identification Codes

Let’s take a look at these two methods in a little more detail.

Transmitter Identification Codes via Alphabetic List

Start by looking at the alphabetical list to determine your vehicle’s transmission identification code. There are different transmission models identified by each alphabet. A few of these lists are elaborated below based on Ford F-150 models.

You can read more about Ford Focus Says Transmission Fault Service Now


There are different codes corresponding to trim levels and transmission types in 2007 models of F150 trucks with “Q” identification codes.


This 2005 Ford F150 is fitted with 4R70E, 4R75E, and 5R2-C transmission codes, representing four-speed automatic, four-speed automatic, and five-speed manual transmissions, respectively.

1997 to 2003

A 1997-2003 model’s code “E” means it has a 4-speed automatic transmission with 4R100 overdrive; “M” means it has a 5-speed manual transmission with 5R2-C overdrive; “U” means it has a 4-speed automatic transmission with 4R70W.

1990 to1992

The G code is for C6 automatic transmissions on 1990-1992 Ford F150s, U is for 4-speed automatic transmissions 4R70W, and M and E are for 5-speed manual transmissions with M5OD overdrive and E4OD automatic transmissions, respectively.

Transmitter Identification Codes from Identification tags

Using the identification tag on your Ford, you can also find out what the transmission identification code is. This identification code for your car is actually based on the alpha-numeric number on the metal tag.

For models from 2010 onwards, the 6-speed transmission code 6R80 has been adopted; while for models from 2015 onwards, the 10-speed transmission code 10R80 has been adopted.

Ford F-150s with 6-speed and 10-speed automatic transmissions have transmission identification numbers 6R80 and 10R80, respectively. A variety of V6 and V8 engines are compatible with these adaptors, as are 2.7-litre and 3.5-litre EcoBoost V6 engines, as well as the 5.0-litre V8.

Ford dealerships or your owner’s manual are the best ways to verify your vehicle’s code since there are many variations and similar transmissions that come with different engines.

Community Insights and Experiences

Gathering feedback from Ford F-150 owners

It can be useful to tap into the collective knowledge of Ford F-150 owners, as the Ford F-150 community is large and diverse. Transmission-related queries can be addressed through real-world experiences and shared knowledge.

Real-world scenarios related to transmission codes

A real-world scenario can provide owners with an insight into the correlation between transmission codes and actual experiences. Communities become more informed and empowered when they learn from each other’s challenges and successes.

Shared knowledge and troubleshooting tips

Decoding transmission codes is only one aspect of community-driven knowledge sharing. It is common for Ford F-150 owners to share troubleshooting tips and tricks, which promotes community among them.

Future Developments and Updates

Ford’s approach to transmission identification

As far as automotive innovation is concerned, Ford continues to lead the way. In order to understand how a brand delivers cutting-edge solutions, it is crucial to understand how it approaches transmission identification.

Potential changes and improvements

Continuous improvements and innovations characterize the automotive industry. It is important for Ford F-150 owners to stay on top of potential changes to transmission identification codes.

Keeping up with industry trends

Trends in the automotive industry change as the landscape changes. A Ford F-150 enthusiast can ensure that their transmission identification codes remain current by keeping a finger on the pulse of these trends.

How to Locate the Transmission Identification Codes?

It depends on the model year and trim level of the Ford F150 to find the transmission identification code. Codes can be found at the following locations:

How to Locate the Transmission Identification Codes

You can find it on the door jamb of the driver’s side. We have provided information such as VIN, transmission type, tire size, axle code, rim size, and safety compliance certificates for your vehicle.

If you need to read the identification tag on the transmission housing, you can do so without taking the assembly apart.

There may also be information in the owner’s manual of your pickup truck about its transmission type and code. Ford’s authorized dealership can inquire about your vehicle’s VIN if it’s unavailable or stolen.

Read: ECU 128 Code Freightliner [What Is It & Causes]
Read: What Does Full Accessory Power (FAP) Active Means In A Ford?
Read: What Does KWP2000 Code Mean In Vehicles?
Read: Service Theft Deterrent System Reasons And Solution
Read: Can I Drive My Car With 0% Oil Life? Explained

Frequently Asked Questions

How often should I check my Ford F-150’s transmission identification code?

To ensure that your transmission is in good shape, it is recommended to check the code periodically, especially after major maintenance or repairs.

Can I decode the transmission identification code myself, or should I consult a professional?

When you are unfamiliar with automotive codes, you should consult a professional instead of using online tools.

Are transmission identification codes the same for all Ford F-150 models?

In fact, there are many variations depending on factors such as model year, engine type, and technological advancement.

How can I troubleshoot common transmission issues using the identification code?

In order to troubleshoot problems and communicate more effectively with mechanics, it is important to understand how specific codes correlate with common problems.

Does Ford provide resources for decoding transmission identification codes?

Ford provides owners with documentation and resources to help them understand their vehicle’s identification code.


The F150 transmission identification codes can be understood by following the information above. It is important to know how to locate these codes, which I have explained in this guide.

There is also information in this guide about how to determine which codes apply to your specific model. If you know this information, you can easily find your vehicle’s transmission identification code.

It will now be easier for you to understand what the Ford F-150 transmission identification code means when you hear about it next time!

Leave a Comment