Holden Colorado Problems: What You Need To Know

Has your Holden Colorado been giving you problems? There’s no need to feel alone. It can sometimes be difficult to enjoy driving this robust vehicle because of a variety of problems, ranging from engine problems to electrical glitches.

To provide some troubleshooting tips and shed light on some of the most common Holden Colorado problems, this article aims to shed some light on some of the most common problems.

Holden Colorado Problems What You Need To Know

Have you ever wondered, “What are some common Holden Colorado problems?” ”, continue reading! Let’s look at these issues in detail so you can gain a better understanding of what’s wrong with your vehicle.

Table of Contents

Holden Colorado Problems

Transmission Problems

Holden Colorados with 6-speed transmissions are sometimes prone to issues such as shifting, slipping gears, and sudden jerks. As a result of transmission problems, more than 10,000 utes were recalled in 2017. Manufacturers from 2015 to 2017 were specifically affected by this recall. As a result of the recall, there could be slipping or shifting in the transmission.

Holden Colorado owners have complained about transmission problems outside of the recall. Among these are shifting, gear slippage during acceleration or deceleration when going uphill, and sudden jerks while shifting gears while towing a trailer.

According to The Honest Mechanic Colorado,

A torque converter problem is responsible for this. Owners of Holden Colorados have reported this issue as the most common issue.

In transmissions, torque converters transmit power from engines to transmissions. To connect the two parts, a fluid coupling is used.

When you accelerate or decelerate your vehicle, you may hear shudders caused by a faulty torque converter. Power may not be transferred smoothly through the torque converter. Towing a trailer, for example, may make the shuddering more pronounced.

Torque converters can fail for several reasons, including:

Low fluid level
Contaminated fluid
Worn or damaged seals
Worn or damaged bearings

Holden Colorado transmission problems;

Change your transmission fluid and filter according to the manufacturer’s recommendations.
Make sure you do not shift or stop while driving.
Don’t tow loads that are too heavy.
The first thing to do if you notice any signs of transmission issues is to take your vehicle to a dealership who is authorized to diagnose your vehicle.

Your vehicle’s transmission system should be kept in good condition by following these steps and avoiding complications in the future.

You can reduce the likelihood of transmission repairs by following these suggestions.

Dreaded Diesel Particulate Filter (DPF) Clogs

Holden Colorados have been reported to have DPF blockages. Particles of soot are captured by DPFs from exhaust gases. Regenerating them regularly can prevent obstructions. Soot particles in the DPF are burned off during regeneration.

DPF blockages can be caused by several factors;

The ute must be driven at high speeds for an extended period of time in order to achieve the temperatures required for DPF regeneration. Your Colorado may build up soot particles if you only use it for trips. If your DPF is not properly regenerated, it may not be able to remove the particles properly.
A malfunctioning EGR valve can result in exhaust gas being recirculated back into the engine. It is possible for the DPF to become clogged if this valve malfunctions.
The wrong type of engine oil is being used

DPF blockage may present with these symptoms in Holden Colorado utes;

Decreased engine power
Consumption of fuel increased
On the dashboard, an illuminated warning light appears

Here are some suggestions to avoid clogs;

Maintain a regular driving schedule. The regeneration process will be aided by this. Soot particles should be burned off.
Having your DPF checked by the dealership at regular intervals is essential. Any signs of clogging can be detected and cleaned if necessary.
Engine oils recommended by the manufacturer should always be used.
Whenever possible, avoid stop-and-go traffic to prevent stopping and going from preventing the DPF from reaching the required temperature for regeneration.

Follow these recommendations to extend your Holden Colorado DPF’s lifespan and avoid costly repairs in the future.

Rust and Corrosion Woes

Over 10,000 Holden Colorado utes were recalled in Australia in 2019 due to rust concerns. Between 2012 and 2016, the recall affected vehicles. This recall was initiated to fix a problem with the paint on the chassis, which could cause cracks and ultimately lead to rust.

Apart from recall-related cases, other Holden Colorado owners have complained about rust issues despite not participating in the recall. Rust has been reported in the following areas by these owners:

The chassis
The wheel arches
The door sills
The roof
The tailgate

Our 2013 BRAND NEW HOLDEN COLORADO 7 was parked for 2-3 weeks before we noticed small orange rust spots on all panels, similar to the Holden Cruze and Colorado Ute models which have been experiencing the same problem, Holden Dealers call this FALLOUT. This problem was placed back on us since we live in such an area. If & when the rust spots reappear, it would be our responsibility to fix them since the Holden Dealer does not warrant this problem after repair. It is more obvious on white cars, so please check yours.

Keep your Holden Colorado ute rust-free with these tips;

Make sure your ute is regularly washed and dried.
As an additional measure, wax should be applied regularly.
Consider treating areas like the chassis with rust-proofing treatments.
Driving on salt-treated roads or through salt water is not recommended.

Holden Colorado reliability

It is a reliable engine that can last a long time on the Holden Colorado. Nevertheless, regular engine servicing at a Holden dealer or specialist is essential to prevent problems with the engine from occurring.

Read: GWM P Series Problems

Frequently Asked Questions

Are Holden Colorado problems common?

Despite Holden Colorado’s reputation for reliability, it is not immune to common problems. These problems can be prevented and addressed with regular maintenance.

How often should I have my Holden Colorado inspected?

The owner’s manual recommends routine inspections every six months in order to catch potential problems early.

Can I address minor issues myself, or should I always consult a professional?

In the case of complex problems, it is recommended that owners seek professional advice in order to ensure correct diagnosis and resolution.

What is the average lifespan of Holden Colorado tires?

Depending on driving conditions and maintenance, tires can last a long time. Tires can last longer if their pressure is checked regularly and maintained properly.

How can I stay informed about Holden Colorado recalls?

It’s important to stay up-to-date on any recalls related to your Holden Colorado by checking the manufacturer’s website regularly and staying in touch with the local dealership.

Conclusion

Finally, it’s worth noting that most issues and problems associated with Holden Colorado can be resolved. In the event you are experiencing any of these common Holden Colorado issues, I strongly suggest you contact your dealer and explore the possible solutions they may be able to recommend.