ECU 128 Code Freightliner [What Is It & Causes]

What is the meaning of an ECU 128 code on your Freightliner? Why does this code exist? The purpose of this article is to provide an answer to this question.

I am not sure what this code means, but it seems to affect a significant number of truckers.

You have written this article in order to provide as much information as you can about ECU 120, its meaning, and what their actual actions should be. There is no guarantee that this code is an error.

ECU 128 Code Freightliner [What Is It & Causes]

The control module is indicated by this indicator. Checking the control module will then give you the proper error code indicating what the problem is with the truck.

This is essentially pointing the driver to the control module to address the actual issue.

What is the Ecu 128 Code?

ECU 128 codes are used by the international transportation industry as unique identifiers for freight containers. To simplify and standardize container identification, the European Union developed this code.

What is the Ecu 128 Code

What does the Ecu 128 Code mean for freightliner owners?

For identifying and tracking freightliner vehicles, the European Commission uses the ECU 128 Code. There is a code displayed on the windscreen on the right side of the windshield. A freightliner vehicle can be identified by its 12-digit code. For safety reasons, every freightliner model starting in 1995 must be registered with the ECU 128 Code, and owners must keep track of their registration numbers.

ECU 128 code Freightliner: Causes

An engine problem is usually indicated by diagnostic trouble code ECU 128 on Freightliner trucks. A malfunction or error in the engine can result in ECU code 128 appearing on the display.

ECU 128 code Freightliner Causes

Freightliner trucks with ECU 128 codes commonly have the following problems:

Oil Pressure Sensor Fault

A faulty oil pressure sensor may result in fault code 128 being displayed by the engine control system.

Engine Coolant Temperature Sensor Fault

Engine control systems may generate ECU error code 128 when faulty coolant temperature sensors are used.

Throttle position sensor malfunction

An ECU code 128 may be issued if the throttle position sensor malfunctions.

Air Pressure Sensor Fault

Engine control systems may issue ECU code 128 if the air pressure sensor is faulty.

Fuel injection system malfunction

The engine control system may display fault code 128 if the fuel injection system malfunctions.

Malfunction of the electronic control unit of the engine

An engine control system may issue code ECU 128 if the electronic control unit of the engine is defective.

Is ECU 128 an Error Code?

A national effect, not an error code, is the ECU 128 if it is briefly touched.

Truck drivers receive this alert when there might be a problem elsewhere on the truck.

To troubleshoot any potential problems, the prompt directs the driver to check the ECM. Pulling out the area code of a truck can be straightforward depending on the model.

To navigate to a specific area code, use controls inside the vehicle.

You may read more about What Does The ASC System Service Required Light Mean?

To determine the true nature of the problem, you may need to connect a diagnostic machine to the truck.

This particular code is used to cover several other codes, and so it isn’t an error code. The purpose is merely to illustrate that further diagnostics are needed.

Checking if your freightliner is affected by ECU 128

To minimize the impact of the ECU 128 Code on your freightliner and its cargo, there are a few things you can do.

  • You should first update your firmware. The engine and transmission will be fixed as a result.
  • Secondly, pay attention to any warning lights on your truck. Please contact your dealer if you encounter any serious problems.
  • In addition, keep an eye on your fuel economy at all times. Bringing your truck in for servicing may be necessary if you notice significant decreases in performance or fuel efficiency.

How to fix Ecu 128 code issue?

Following are some steps you can take if you experience an ECU 128 code issue with your Freightliner truck:

  • In the engine bay, find the fuse box for the “ECU Diagnostic” on the passenger side (near the gearshift). A 20A fuse should be substituted if it is not present.
  • All unnecessary electrical accessories should be disconnected from the battery cable and the ECU.
  • Disconnect all electrical accessories in the truck cab, including power windows, locks, air conditioners, headlights, taillights. If these devices are interfering with each other, this will help isolate the issue.
  • Jumper cables can be connected to an ECU, and to a good ground location, such as an exhaust pipe or metal frame. Observe all readings on your ECU diagnostic screen for at least five minutes after starting your engine. Codes related to emissions control should be found (low EGR pressure or a fault in the EGR system). Step 5 can be followed if no codes are displayed.
  • Using a gentle pull on the wire clips on each connector, remove the protective cover on the Ecu Diagnostic harnesses and check for any codes that may have been reset during Step 4. Upon clearing all codes, reconnect each connector and start your engine again before moving on to step 6.
  • Install the protective layer again

Should You Ignore the ECU 128 Error Code?

No, of course not. We might need to examine how the code appears to be able to clarify this particular issue.

It may not be necessary to pay attention to the code when it appears intermittently. Codes like these are universal signs or indicators pointing toward the ECM, where a more accurate diagnosis can be made.

It is sometimes possible for specific sensors to be triggered by something while driving, which can then trigger the ECU128 code.

It may not be necessary to resolve the issue immediately if this is the case.

It is most likely that you will not find anything wrong with your truck, and a dealership or workshop will probably not find anything wrong either.

The error code should be investigated if it persists because it may indicate a serious problem with the vehicle.

When an ECU 128 code issue is not fixed, what are the consequences?

A fault code Ecu 128 may cause the truck to stop starting, or it may have other serious problems. Sometimes, the engine simply stops working. A truck that is not repaired could suffer costly repairs or even lose its entire contents. The Freightliner issue with ECU 128 must be fixed ASAP.

You can use this guide to decode Freightliner trucks’ ECU 128 code if you need help. You should be familiar with the code if you plan on buying or leasing a truck to understand its engine and emission requirements.

How Can You Clear ECU 128 Code?

The ECU 128 code cannot be cleared simply by clearing it. The ECU 128 code can be removed by fixing the cause of the problem. The code should no longer appear in most cases after this is done.

There are times, however, when the error code will persist even after it has been resolved. The ECM may need to be reset in such cases. You can do a hard reset to accomplish this.

If you want to do this, you should unplug your vehicle’s battery terminals for at least 30 minutes. Ideally, you should do it for as long as you can.

By doing this, the system of the car is completely drained of all its power. Afterward, you should be able to fix the error code by reconnecting your battery terminals.

Future Maintenance to Avoid Recurrence

Future Maintenance to Avoid Recurrence

Implementing Preventive Measures

Proactive measures are necessary to prevent the recurrence of ECU 128 codes. This article will explain how to avoid similar issues in the future through the implementation of future maintenance practices.

Regular ECU Check-ups for Freightliner Owners

It is essential for Freightliner owners to regularly inspect their ECU systems. ECU inspections should be conducted on a regular basis, and this section discusses the importance of doing so.

Read: EDC Light On Iveco [Causes, Meaning & Solutions]
Read: Acura MDX Check SH AWD System
Read: Renault Braking System Fault [Meaning & Solution]
Read: Engine Failure Hazard Renault [Causes & Solutions]
Read: GWM P Series Problems: Addressing Common UTE Issues For A Smooth Ride
Read: What Is Speed Compensated Volume? Explained

Frequently Asked Questions

What Does ECU 128 Code Indicate?

Understanding Freightliner’s ECU 128 code will help you unravel the mystery.

Can I Drive with an Active ECU 128 Code?

Whether it is advisable to drive with an active ECU 128 code and find out the safety and operational implications.

How Often Should I Check My Freightliner’s ECU?

ECU checks should be performed on a regular basis. Freightliner’s ECU should be inspected at the recommended frequency.

Are There Temporary Fixes for ECU 128 Issues?

It may be necessary to apply temporary fixes in certain situations. Temporary solutions to ECU 128 issues will be discussed.

What Other Codes Might Be Related to ECU 128?

You can gain a better understanding of your Freightliner’s potential issues by understanding the broader context of related codes.


ECU 128 codes do not indicate any one thing in particular, but are umbrella notifications that alert the driver to look for the actual error code located inside the ECU. This will allow a solution to be found to the actual problem.

Leave a Comment